sorin 75220 Скачать руководство пользователя страница 246

Страница: 246 / 304

Troubleshooting

14-14

20077/021 US

TRA

Operator’s Manual

Centrifuge lid lock
blocked in closed
position

Warning

The centrifuge lid lock is still
closed. Do not try to force
opening.

• Press X to exit and display the

ready screen.

• Otherwise, switching the

machine off and on again
might solve the problem.

If the problem persists, call the
authorized technical service.

Centr. lid lock blocked

Centrifuge lid open

Warning

The centrifuge lid might be
open.

Close the centrifuge lid and
press PLAY to resume.

If the problem persists, contact
the authorized technical
service.

Centrifuge lid open

Check Centrifuge lid
lock

Warning

The centrifuge lid lock is
malfunctioning.

Press X to restore Lock position,
then close the lid.

If the problem persists, call the
authorized technical service.

Check centr. lid lock

Close PPP & Waste.
Open PRP. Then,
press PLAY

Instructional
Message

Follow the on-screen
instructions. Refer to

Chapter

10: Preoperative Sequestration

(PPP and PRP)

Close PPP line, open
PRP line. Then, press
PLAY

Instructional
Message

Follow the on-screen
instructions. Refer to

Chapter

10: Preoperative Sequestration

(PPP and PRP)

Close PRP & Waste.
Open PPP. Then,
press PLAY

Instructional
Message

Follow the on-screen
instructions. Refer to

Chapter

10: Preoperative Sequestration

(PPP and PRP)

Close PRP line, open
PPP line. Then, press
PLAY

Instructional
Message

Follow the on-screen
instructions. Refer to

Chapter

10: Preoperative Sequestration

(PPP and PRP)

Do you confirm
empty?

Alarm

This operation may send air
into the RBC bag.

• Press EMPTY to start the

Empty phase.

• Press X to exit and display the

ready screen.

WARNING: Repeating the bowl
emptying several times may
lead to elimination of all
residual air and possible
collapsing of tubings and waste
bag, and inflation of the RBC
bag.

Do you confirm empty?

Message Text

Warning or

Alarm

Buttons Available in the

Button Bar During

Warning/Alarm

Operator Response

Data Management

Text

Table 14-2 List of Warnings and Alarms Which Might Occur During Processing (Continued)

Содержание 75220

















































































































































































































































































































Результаты поиска

Содержание 75220

Отзывы:

sorin 75220, Руководство оператора, Страница: 246 / 304

Результаты поиска

Содержание 75220

Отзывы: