sorin 75220, Руководство оператора, Страница: 126 / 304

Processing
5-44
20077/021 US
X
TRA
Operator’s Manual
Menu Screen
Touching the Menu button from any screen displays the Menu Screen which consists of a list of tabs.
Touching one of the tabs will display the associated menu screen.
Tally Tab
The Tally tab of the Menu Screen displays information about the current and past cases and allows the
operator to save or print that information (see Figure 5-43).
Figure 5-43 Tally Tab of the Menu Screen
The topmost line of the Tally Tab consists of the following information, from left to right: the Patient ID
as entered in the ID tab of the Menu Screen (refer to “Identifier (ID) Tab” on page 5-46), a sequential
case number assigned by the machine to each case, and the date on which the case was started.
The tally table in the center of the End of Case Screen contains totals pertaining to the current case
(or a past case if one has been selected using the “Past Cases” button). The data in the tally table may
be exported or printed using the “Send Output” button.
The table below shows which tally data is displayed for each protocol type (ATS or SEQ) for each bowl
of the current case.
1. Data Destination Menu
The item selected with the data destination menu is the destination for case data sent using the
“Send Output” button. Touching the drop-down triangle button to the right of the menu
displays the first three menu choices. The menu can be scrolled using the up and down arrow
buttons which appear to the right of the menu items. Touching an item in the list selects it as the new
destination. Touching the drop down triangle button without making a choice from the list closes the
menu without changing the destination.
Type of Case Tally Data Displayed
ATS Fluid In (ml) Hct In (%) RBCs (ml) Hct Out (%) Supernatant
(reduction %)
Waste line
(colored dot)
SEQ Whole Blood
(ml)
RBCs (ml) PPP (ml) PRP (ml)
Table 5-1 Tally Data Displayed For Each Protocol Type
2
3
1
1 Data destination menu 3 Close button
2 Tabs