sorin 75220, Руководство оператора, Страница: 247 / 304

Troubleshooting
X
TRA
Operator’s Manual
20077/021 US
14-15
Disconnect the
patient from the
machine
Alarm
You are about to switch from a
postoperative protocol to an
intraoperative protocol. The
patient must be disconnected
from the machine.
Disconnect the patient before
proceeding. Once done, touch
the V button.
Warning : Not following these
instructions may expose the
patient to high suction levels.
Disconnect the patient
Empty line occluded
Alarm
The empty line might be
clamped or occluded.
• Remove the clamp on the line
and/or verify the absence of
occlusions, then press PLAY
to resume the current phase.
• You may decide to disable the
sensor and the related alarm
for the current case by
pressing DISABLE ALARM.
If the problem persists, call the
authorized technical service.
Empty line occluded
Fluid loss in
centrifuge – Alarm
disabling
Warning
You are about to disable the
Centrifuge Fluid Loss Sensor
and related alarm.
Press DISABLE ALARM to
disable the alarm for the rest of
the case, or press X to maintain
it.
WARNING: Disabling this alarm
may result in loss of blood or
biohazard risk to operator. The
device must be directly
monitored by the operator until
the end of the case.
Message Text
Warning or
Alarm
Buttons Available in the
Button Bar During
Warning/Alarm
Operator Response
Data Management
Text
Table 14-2 List of Warnings and Alarms Which Might Occur During Processing (Continued)