Siemens IM 153-4 PN Скачать руководство пользователя страница 120

Страница: 120 / 274

Maintenance and service

7.10 Updating the IM 153-x

ET 200M

118

Operating Instructions, 12/2008, EWA-4NEB780600602-08

7.10.3

Update of the IM 153-2Bx00

Where can I obtain the latest firmware version?

You can order the latest firmware from your Siemens partner, or download it from the

Internet (

http://support.automation.siemens.com/WW/view/en/15350678

Tip:
●

Prior to the update note down the current version of your firmware.

●

If you encounter problems with the new firmware, you can also download the previous

(current) firmware from the Internet and transfer it to the interface module again.

Principle

An update is possible with IM 153-2 as of order number 6ES7153-2Bx00-0XB0. You will

require

STEP 7 (V5.2 or higher) for this purpose.

There are 3 ways in which you can perform an update:
●

from PD / PC via PROFIBUS DP (direct)

●

from PD / PC via PROFIBUS DP and CPU

●

via SIMATIC Micro Memory Card

After a successful update the former firmware version of the IM 153-2 must be covered over

with a sticker showing the updated version of the firmware.

Requirements

For update via PROFIBUS-DP
●

The IM 153-2 in the station that is to be updated must be available online.

●

The files with the current (new) version of the firmware must be available in the file

system of your PD / PC.

for update via SIMATIC Micro Memory Card
●

The update files must be available on the SIMATIC Micro Memory Card.

Содержание IM 153-4 PN



















































































































































































































































































Результаты поиска

Содержание IM 153-4 PN

Отзывы:

Бренды по названию

Популярные бренды

Siemens IM 153-4 PN, Руководство по эксплуатации

Результаты поиска

Содержание IM 153-4 PN

Отзывы:

Бренды по названию

Популярные бренды