Rohde & Schwarz SMBV100A, Руководство пользователя

Страница: 324 / 780

Instrument Function
R&S
®
SMBV100A
307 Operating Manual 1407.6062.32 ─ 08
Data List Editor
A list of binary values with a maximum length of 2^31 bits can be entered in the "Data
List Editor". This value corresponds to a file size of approx. 268 Mbyte.
To increase readability, the bits are displayed in groups of four. The current cursor posi-
tion, the length of the list and the list file name are displayed above the list. The offset
starts with the value 0 which corresponds to the bit position on the left side of the first
row, i.e. the beginning of the list. On the left edge of the editor, the last three offset posi-
tions are specified at the beginning of the row.
An existing list can be edited in the insert or overwrite mode.
SCPI command:
​
[:
​
SOURce<hw>]:
​
BB:
​
DM:
​
DLISt:
​
SELect
​
on page 578
​
[:
​
SOURce<hw>]:
​
BB:
​
DM:
​
DLISt:
​
DATA
​
on page 577
​
[:
​
SOURce<hw>]:
​
BB:
​
DM:
​
DLISt:
​
DATA:
​
APPend
​
on page 577
GoTo ← Data List Editor
Opens the entry window for the bit position. The cursor marks the bit at the selected
position.
SCPI command:
n.a.
Start Select ← Data List Editor
Defines the current cursor position as the start position for the range to be marked. The
stop position is defined by entering an offset under "GoTo".
When a start position has been activated, the button will be re-labelled to "Undo
Select". When the button is clicked now, the selected range will be deactivated.
SCPI command:
n.a.
Copy ← Data List Editor
Copies the selected values.
SCPI command:
n.a.
Cut ← Data List Editor
Cuts the selected values.
SCPI command:
n.a.
Paste ← Data List Editor
Pastes the values that have been copied or cut before.
SCPI command:
n.a.
Baseband Signal - Baseband Block