Rohde & Schwarz SMBV100A, Руководство пользователя

Страница: 221 / 780

Instrument Function
R&S
®
SMBV100A
204 Operating Manual 1407.6062.32 ─ 08
Pulse Period - Pulse Generator
Sets the period of the generated pulse. The period determines the repetition frequency
of the internal signal.
SCPI command:
​
[:
​
SOURce<hw>]:
​
PULM:
​
PERiod
​
on page 687
Pulse Width - Pulse Generator
Sets the width of the generated pulse. The width determines the pulse length. The pulse
width must be at least 20 ns less than the set pulse period.
SCPI command:
​
[:
​
SOURce<hw>]:
​
PULM:
​
WIDTh
​
on page 690
Pulse Delay - Pulse Generator
(External trigger only)
Sets the pulse delay. The pulse delay determines the time that elapses after a trigger
event before pulse modulation starts. The pulse delay is not effective for double pulse
generation.
SCPI command:
​
[:
​
SOURce<hw>]:
​
PULM:
​
DELay
​
on page 685
Double Pulse Width - Pulse Generator
(Double Pulse only)
Sets the width of the second pulse.
SCPI command:
​
[:
​
SOURce<hw>]:
​
PULM:
​
DOUBle:
​
WIDTh
​
on page 686
Double Pulse Delay - Pulse Generator
(Double Pulse only)
Sets the delay from the start of the first pulse to the start of the second pulse.
SCPI command:
​
[:
​
SOURce<hw>]:
​
PULM:
​
DOUBle:
​
DELay
​
on page 685
Trigger Mode - Pulse Generator
Selects the trigger mode for pulse modulation.
"Auto" The pulse generator signal is generated continuously.
RF Signal and Analog Modulations - RF Block