Instrument Function
R&S
®
SMBV100A
346
Operating Manual 1407.6062.32 ─ 08
The resulting clock rate must not exceed the maximum ARB clock rate (see data sheet).
The number of sample values is automatically restricted by reference to the set fre-
quency.
SCPI command:
Phase Offset Q (Sine Test Signal)
Enters the phase offset of the sinewave signal on the Q channel relative to the sinewave
signal on the I channel.
SCPI command:
Generate Signal HD (Sine Test Signal)
Generates a signal and saves it to a file.
The File Select window opens automatically and the signal can be stored as a waveform
file.
SCPI command:
Generate Signal RAM (Sine Test Signal)
Generates a signal and uses it as output straight away.
SCPI command:
Rect Test Signal
To access the "Sine Test Signals" dialog, in the "ARB MOD" dialog set the parameter
"Create Test Signal" to Rect and press "Create Test Signal".
The dialog can be used to configure a rectangular test signal. A rectangular test signal
with a duty factor of 0.5 is created. Amplitude and offset are adjustable. Both paths, I and
Q, get the same signal.
Frequency (Rect Test Signal)
Enters the frequency of the test signal.
SCPI command:
Samples per Period (Rect Test Signal)
Enters the number of sample values required for the rectangular signal per period.
Baseband Signal - Baseband Block
Содержание SMBV100A
Страница 31: ......
Страница 117: ...Manual Operation R S SMBV100A 100 Operating Manual 1407 6062 32 08 Legend of Front Panel Controls ...
