manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz SMBV100A Скачать руководство пользователя страница 310

Instrument Function

R&S

®

SMBV100A

293

Operating Manual 1407.6062.32 ─ 08

5.8.3.5

Conflicting Settings - Custom Digital Mod

Having selected a modulation procedure, not every combination is possible when select-
ing the settings for the modulation parameters "Symbol Rate" and "Coding". These
restrictions inevitably give rise to conflicting settings if a parameter is changed and leads
to a prohibited combination.

A conflicting setting is indicated by a message on the Info line in the display. The R&S
SMBV displays the setting entered by the user, but the modulation signal actually gen-
erated does not correspond to this display. A conflict of settings can be triggered if the
user changes a parameter inappropriately. The message disappears as soon as a con-
flict-free setting is entered.

A list of the possible settings conflicts and messages in digital modulation can be found
in 

​

chapter 9, "Error Messages"

, on page 727.

5.8.3.6

Custom Digital Mod User Interface

The menu for setting digital modulation can be opened either in the "Baseband" block or
in the menu tree under "Baseband".

The "Custom Digital Modulation" menu enables direct selection of the data source,
standard, symbol rate, coding, modulation type and filter. All other settings are entered
in submenus which are called via "More" buttons.

The upper part of the menu is used for powering up digital modulation as well as for calling
the default settings and user-defined standards.

The data source is selected and set in the "Data Source" section.

The "List Management" button opens a submenu for calling the data editor and the file
manager.

The middle part of the menu is used for selecting the standard, the symbol rate and the
coding.

The modulation type is set in the "Modulation" section.

 

 

Baseband Signal - Baseband Block

Содержание SMBV100A













































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды