C Commands
C Commands
LASAIR II Operator’s Manual
LASAIR II Operator’s Manual
Page
Page
G-5
G-5
63
63 Search
Search Alarm
Alarm Print
Print On/Off
On/Off
C Command Table Format
C Command Table Format
These commands are from the C command above. All of these commands are
These commands are from the C command above. All of these commands are
redundant, and are provided for u
redundant, and are provided for users of existing LASAIRs who want to
sers of existing LASAIRs who want to
simplify their upgrade path. Some of these commands split internal variables
simplify their upgrade path. Some of these commands split internal variables
into several pieces. For instance “
into several pieces. For instance “
C 0
C 0
” through “
” through “
C 6
C 6
” are used to set date and
” are used to set date and
time. Because of the variable split, unexpected results can be obtained if the user
time. Because of the variable split, unexpected results can be obtained if the user
is not careful with software coding. For instance, setting the
is not careful with software coding. For instance, setting the date and time in
date and time in
multiple parts has the
multiple parts has the possibility of time-rollover in-between settings. In other
possibility of time-rollover in-between settings. In other
words, if the LASAIR II seconds rolls over from 59
words, if the LASAIR II seconds rolls over from 59 to 0, then at a
to 0, then at a minimum the
minimum the
minutes will also change, and
minutes will also change, and if this occurs right after setting the minutes, then
if this occurs right after setting the minutes, then
the expected time will be wrong.
the expected time will be wrong.
Command Format
Command Format
C nn
C nn
sssssssssss
sssssssssss
where:
where:
C nn
C nn
= command # (0-38)
= command # (0-38)
sssssssssss
sssssssssss
= any
= any alphanumeric entry appropriate to the parameter being
alphanumeric entry appropriate to the parameter being
defined.
defined.
