Statistics Mode Operation
Statistics Mode Operation
LASAIR II Operator’s Manual
LASAIR II Operator’s Manual
Page
Page
8-15
8-15
When Using Auto-selection of User-created Location Names
When Using Auto-selection of User-created Location Names
When the sample is complete, the
When the sample is complete, the following
following
dialog box will display:
dialog box will display:
To continue sampling:
To continue sampling:
1
1
Move the LASAIR II to the next
Move the LASAIR II to the next location.
location.
2
2
Acknowledge the dialog box by pressing
Acknowledge the dialog box by pressing
the
the
Enter
Enter
button.
button.
NOTE:
NOTE:
On the
On the
Main Display
Main Display
, observe that LASAIR II has changed the
, observe that LASAIR II has changed the
location name to the next name
location name to the next name in sequence. Example: from “Room 1 Col B12”
in sequence. Example: from “Room 1 Col B12”
to “Room 1 Col B15.”
to “Room 1 Col B15.”
3
3
Start the next sample by pressing the
Start the next sample by pressing the
Start
Start
button.
button.
4
4
Repeat steps 1–3 until the
Repeat steps 1–3 until the LASAIR II notifies you that all samples are complete.
LASAIR II notifies you that all samples are complete.
When Not Using the Auto-increment Mode
When Not Using the Auto-increment Mode
If you have not enabled auto-increment, the
If you have not enabled auto-increment, the
following dialog box will be displayed
following dialog box will be displayed
when sampling is completed at a loca
when sampling is completed at a location:
tion:
To select the next location name and
To select the next location name and
continue sampling:
continue sampling:
1
1
Press the
Press the
Enter
Enter
button to close the
button to close the
Statistics
Statistics
Update
Update
dialog box.
dialog box.
2
2
Open the
Open the
Sampling Setup
Sampling Setup
screen.
screen.
3
3
Press the
Press the
Enter
Enter
button to activate the edit mode. The location selection box
button to activate the edit mode. The location selection box will
will
be active when the screen changes to the edit mode.
be active when the screen changes to the edit mode.
4
4
Use the up and down
Use the up and down arrow buttons to highlight the location name you
arrow buttons to highlight the location name you want to
want to
use for the next sample.
use for the next sample.
5
5
Accept the location name and navigate to the
Accept the location name and navigate to the
Main Display
Main Display
..
6
6
Move the LASAIR II to the location that matches the location name you have
Move the LASAIR II to the location that matches the location name you have
selected.
selected.
NOTE:
NOTE:
Y
You could have moved the LASAIR II to the
ou could have moved the LASAIR II to the next location at any point
next location at any point
before pressing the
before pressing the
Start
Start
button.
button.
7
7
Ensure that the proper location appears on
Ensure that the proper location appears on the display and then p
the display and then press the
ress the
Start
Start
button to collect the next sample
button to collect the next sample
