Page
Page 9-4
9-4
LASAIR
LASAIR II
II Operator’s
Operator’s Manual
Manual
Chapter 9: Recipes
Chapter 9: Recipes
This button saves the current statistics parameters to a recipe. It
This button saves the current statistics parameters to a recipe. It
operates like the save sampling parameters. For convenience, a copy
operates like the save sampling parameters. For convenience, a copy
of this button is also on the statistics setup page.
of this button is also on the statistics setup page.
This button deletes the currently highlighted recipe. A recipe cannot be
This button deletes the currently highlighted recipe. A recipe cannot be
erased if it is attached to one
erased if it is attached to one or more locations. The location attachments
or more locations. The location attachments
must be deleted first.
must be deleted first.
This button erases all recipes. A warning/confirmation prompt
This button erases all recipes. A warning/confirmation prompt
is displayed before the recipes are erased. If locations are
is displayed before the recipes are erased. If locations are
attached to recipes, then either the attachments must be
attached to recipes, then either the attachments must be deleted, or the locations
deleted, or the locations
must be deleted before the recipes can be deleted.
must be deleted before the recipes can be deleted.
This button prints the highlighted recipe.
This button prints the highlighted recipe.
Recipe Names
Recipe Names
Recipe names may be up to 16 characters. The following characters are illegal
Recipe names may be up to 16 characters. The following characters are illegal
in recipe names: \, /, *, ?, “, <, >, :, and |.
in recipe names: \, /, *, ?, “, <, >, :, and |.
Figur
Figuree 9-2, “Set
9-2, “Setup Screen, Lo
up Screen, Location
cations Page,” on page
s Page,” on page 9-6, show
9-6, shows the locat
s the location
ion
association page of the Recipe Setup Screen. This display is a table of all the
association page of the Recipe Setup Screen. This display is a table of all the
locations and recipe associations. Each recipe can be associated with multiple
locations and recipe associations. Each recipe can be associated with multiple
locations.
locations.
To select a recipe to run at a location:
To select a recipe to run at a location:
1
1
Open the Recipe Screen-Location Page
Open the Recipe Screen-Location Page
2
2
Press the blue enter key, to enter edit mode.
Press the blue enter key, to enter edit mode.
Figure 9-1: Recipe Setup Screen, Setup Page
Figure 9-1: Recipe Setup Screen, Setup Page
