Page
Page 6-16
6-16
LASAIR
LASAIR II
II Operator’s
Operator’s Manual
Manual
Chapter 6: Operation
Chapter 6: Operation
Stat
Statistics Mode Sample
istics Mode Sample Print
When the LASAIR II is operated in statistics mode, sample printouts have the
When the LASAIR II is operated in statistics mode, sample printouts have the
room name appended to
room name appended to the sample strip. The room is printed directly above
the sample strip. The room is printed directly above the
the
location name.
location name.
Silencing Alarms
Silencing Alarms
If the alarm is activated, the
If the alarm is activated, the
Main Display Screen
Main Display Screen
(and
(and
Analog Data Display
Analog Data Display
Screen
Screen
) will blink red and yellow. If the audio alarm has been set, the unit will
) will blink red and yellow. If the audio alarm has been set, the unit will
beep.
beep.
To silence an alarm:
To silence an alarm:
Press the
Press the
Enter
Enter
key or one of
key or one of the arrow buttons on the control pan
the arrow buttons on the control panel until all
el until all
alarms are off. The value in alarm will remain in
alarms are off. The value in alarm will remain in red on the
red on the
Main
Main Display
Display Screen
Screen
if it is a particle count value (or on the
if it is a particle count value (or on the
Analog Data Display Screen
Analog Data Display Screen
, if it is an
, if it is an
analog value).
analog value).
To stop the red and yellow flashing:
To stop the red and yellow flashing:
After the pump stops, press the Enter key once more after pressing it to silence
After the pump stops, press the Enter key once more after pressing it to silence
the alarm. Y
the alarm. You can also silence
ou can also silence alarms and stop the red and yellow
alarms and stop the red and yellow blinking by
blinking by
repeating the sampling, without exceeding
repeating the sampling, without exceeding an alarm limit, or by turning the
an alarm limit, or by turning the unit
unit
OFF and then ON.
OFF and then ON.
15
15
rh
PCT
rh
PCT
rh: relative humidity PCT: percent
rh: relative humidity PCT: percent
16
16
15.4
15.4 ||
|| 15.33
15.33 ||
|| 15.43
15.43
A
Average ||
verage || minimum || and
minimum || and maximum relative
maximum relative
humidity in percent. (See lines 12 and 14.)
humidity in percent. (See lines 12 and 14.)
17
17
Alarm: Pump
Alarm: Pump
This line prints when the LASAIR II senses
This line prints when the LASAIR II senses
that the flow rate is
that the flow rate is outside the boundary of 1
outside the boundary of 1
CFM ±5%. (Also see line 3b.)
CFM ±5%. (Also see line 3b.)
18
18
Alarm: Laser
Alarm: Laser
This line prints when the LASAIR II senses
This line prints when the LASAIR II senses
that the laser power is out of
that the laser power is out of the specified
the specified
range. (Also see line 3b.)
range. (Also see line 3b.)
Table 6-1: Printout Legend (Continued)
Table 6-1: Printout Legend (Continued)
