Particle Measuring Systems LASAIR II 310, Руководство оператора

Страница: 125 / 231

Page Page 8-14 8-14 LASAIR LASAIR II II Operator’s Operator’s Manual Manual
Chapter 8: Statistics Mode Chapter 8: Statistics Mode
When Using Auto-incrementing of LASAIR II Location When Using Auto-incrementing of LASAIR II Location
Names/Numbers
Names/Numbers
When the first sample is When the first sample is complete, the following dialog complete, the following dialog box will display. box will display.
To continue sampling: To continue sampling:
1 1 Record a description of where the first sample occurred. Example: “#001- Record a description of where the first sample occurred. Example: “#001-
Ballroom 1, column 12a.”
Ballroom 1, column 12a.”
2 2
Move the LASAIR II to the next Move the LASAIR II to the next location. location.
3 3
Acknowledge the dialog box by pressing the Acknowledge the dialog box by pressing the Enter Enter button. button.
NOTE: NOTE: On the On the Main Dis Main Display play , observe that LASAIR II increments the location , observe that LASAIR II increments the location
to the next number in sequence. Example: from “#001” to “#002.” to the next number in sequence. Example: from “#001” to “#002.”
4 4
Start the next sample by pressing the Start the next sample by pressing the Start Start button. button.
5 5
Repeat steps 1–4 until the LASAIR II indicates that all samples are complete. Repeat steps 1–4 until the LASAIR II indicates that all samples are complete.
NOTE: NOTE: If auto-incrementing location If auto-incrementing location
names is not being used, ensure that names is not being used, ensure that there there
are enough locations names to enable each are enough locations names to enable each
sample location to have its own unique
sample location to have its own unique
name. If there are insufficient location
name. If there are insufficient location
names, LASAIR II will display an error
names, LASAIR II will display an error
message and default to
message and default to Auto-incrementing Auto-incrementing
of LASAIR II-generated location numbers of LASAIR II-generated location numbers ..
See “Locat See “Location Name Set ion Name Setup Screen” on page up Screen” on page 5-8. 5-8.
Ensure that the actual sampling location matches the Ensure that the actual sampling location matches the location name. LASAIR II location name. LASAIR II
will increment the location names in the will increment the location names in the order that they are stored in the order that they are stored in the location location
name list name list starting starting with the location name highlighted in the with the location name highlighted in the Sampling Setup Sampling Setup
Screen Screen . For example, if 10 location names exist, and sampling starts at the . For example, if 10 location names exist, and sampling starts at the
seventh name, sampling will proceed in the following order: 7, 8, 9, 10, 1, 2, 3, seventh name, sampling will proceed in the following order: 7, 8, 9, 10, 1, 2, 3,
4, 5, 6.
4, 5, 6.