Page
Page H-2
H-2
LASAIR
LASAIR II
II Operator’s
Operator’s Manual
Manual
Appendix H: Pharmaceutical (two-channel) Output Mode
Appendix H: Pharmaceutical (two-channel) Output Mode
3
3
Enable the edit mode and place a check mark in the
Enable the edit mode and place a check mark in the
Enable TCP/IP
Enable TCP/IP
check box.
check box.
4
4
Click on the
Click on the
Screen Select
Screen Select
icon
icon softkey
softkey
until
until the
the
Comm Setup-Data
Comm Setup-Data
dialog
dialog
box opens.
box opens.
To allow only 2-channel data to be output to Pharmaceutical Net:
To allow only 2-channel data to be output to Pharmaceutical Net:
1
1
Press the
Press the
Enter
Enter
key to enable the Edit mode. The 0.5
key to enable the Edit mode. The 0.5
µ
µ
m & 5.0
m & 5.0
µ
µ
m check box
m check box
will be highlighted.
will be highlighted.
2
2
Press the
Press the
Enter
Enter
key again to place a check mark in the check box.
key again to place a check mark in the check box.
3
3
Advance to the
Advance to the
0.5
0.5
µ
µ
m
m
& 5.0
& 5.0
µ
µ
m
m
TCP/IP
TCP/IP
check box and place a check mark in it.
check box and place a check mark in it.
Figure H-1: Comm Setup, Network Dialog Box
Figure H-1: Comm Setup, Network Dialog Box
Figure H-2: Comm Setup, Data Dialog Box
Figure H-2: Comm Setup, Data Dialog Box
