Page
Page 5-16
5-16
LASAIR
LASAIR II
II Operator’s
Operator’s Manual
Manual
Chapter 5: Setup
Chapter 5: Setup
2
2
Press Enter to activate Edit Mode.
Press Enter to activate Edit Mode.
3
3
Tab to the first
Tab to the first
Min
Min
value field in the list. Use
value field in the list. Use the directional arrow buttons on
the directional arrow buttons on
the control panel to move around
the control panel to move around the list of variables.
the list of variables.
4
4
Press
Press
Enter
Enter
to initiate the ability to change an alarm limit in a
to initiate the ability to change an alarm limit in a Min or Max field.
Min or Max field.
5
5
Use the editing icon softkeys and the up and down arrows to set or change the
Use the editing icon softkeys and the up and down arrows to set or change the
alarm limit.
alarm limit.
6
6
Press Enter to record that value and to move to the 1/0 radio button.
Press Enter to record that value and to move to the 1/0 radio button.
7
7
Press Enter again to insert a bullet in the
Press Enter again to insert a bullet in the 1/0 radio button. This alarm is now
1/0 radio button. This alarm is now
enabled at the alarm limit you have selected.
enabled at the alarm limit you have selected.
Printing Sampling and Alarm Parameters
Printing Sampling and Alarm Parameters
The current sampling setup and alarm settings can
The current sampling setup and alarm settings can be printed from the Status
be printed from the Status
Screen.
Screen. From
From the
the main
main display
display screen,
screen, select
select the
the
button
button to
to get
get to
to the
the Status
Status
Screen.
Screen. Then
Then select
select the
the
button
button to
to print
print the
the sampling
sampling parameters.
parameters.
Figure 5-9: Alarm Setup Screen, Analog Alarms Page
Figure 5-9: Alarm Setup Screen, Analog Alarms Page
Analog Alarm Input Area
Analog Alarm Input Area
