L
LA
AS
SA
AIIR
R III
I O
Op
peerraatto
orr’’s
s M
Maan
nu
uaall
P
Paag
ge
e 5
5--1
1
Chapter 5
Chapter 5
Setup
Setup
Setup is defining the parameters that will be used when collecting sample data.
Setup is defining the parameters that will be used when collecting sample data.
The LASAIR II uses Setup Screens for the
The LASAIR II uses Setup Screens for the following functions:
following functions:
••
Sampling Setup Screen:
Sampling Setup Screen:
Assign parameters that directly relate to sampling
Assign parameters that directly relate to sampling
••
Alarm Setup Screen:
Alarm Setup Screen:
Specify the particle count or an
Specify the particle count or analog data that will
alog data that will
trigger an audible or visual alarm or both
trigger an audible or visual alarm or both
••
Main Setup Screen:
Main Setup Screen:
Enter a date and time, as well as use the Password
Enter a date and time, as well as use the Password
function
function
••
Analog Display Setup Screen:
Analog Display Setup Screen:
Enable and name your analog devices
Enable and name your analog devices
connected to the LASAIR II
connected to the LASAIR II
••
Communications Setup Screen:
Communications Setup Screen:
Set the communications protocol mode
Set the communications protocol mode
and enter the addresses for connections to a
and enter the addresses for connections to a computer or to facility
computer or to facility
monitoring software
monitoring software
••
4–20 mA input and Output:
4–20 mA input and Output:
(in Appendix I)
(in Appendix I)
••
Statistics Setup:
Statistics Setup:
(in Chapter 8)
(in Chapter 8)
••
Recipes:
Recipes:
(in Chapter 9)
(in Chapter 9)
Each setup screen is
Each setup screen is covered in its own
covered in its own section below. Information will include:
section below. Information will include:
••
How to open the setup screen
How to open the setup screen
••
Setup screen icons
Setup screen icons
••
Field usage
Field usage
NOTE:
NOTE:
If you have configured the LASAIR II to be accessed by means of
If you have configured the LASAIR II to be accessed by means of
Ethernet or serial communications,
Ethernet or serial communications, always leave the instrument’s display on
always leave the instrument’s display on
either the Main Display Screen or the Ana
either the Main Display Screen or the Analog Display Screen. Otherwise, the
log Display Screen. Otherwise, the
remote PC will be unable to ac
remote PC will be unable to access the LASAIR II.
cess the LASAIR II.
Edit Mode
Edit Mode
T
To make any modifications to the
o make any modifications to the current settings in a setup screen, you
current settings in a setup screen, you must
must
enable the Editing Mode by
enable the Editing Mode by pressing the Enter button.
pressing the Enter button.
Editing mode icons will replace the screen navigation icons.
Editing mode icons will replace the screen navigation icons.
