Particle Measuring Systems LASAIR II 310, Руководство оператора

Страница: 184 / 231

C Commands C Commands
LASAIR II Operator’s Manual LASAIR II Operator’s Manual
Page Page
G-3 G-3
C Commands C Commands
Supported C Commands Supported C Commands
C 0 yy C 0 yy
Set Date-Year. Two digit year Set Date-Year. Two digit year
C 1 mm C 1 mm Set Date-Month Set Date-Month
C 2 dd C 2 dd Set Date-Day Set Date-Day
C 3 hh C 3 hh Set Time-Hour Set Time-Hour. Use 24 . Use 24 hour format. hour format.
C 4 mm C 4 mm
Set Set Time-Minute Time-Minute
C 5 sec C 5 sec Set Time--Second Set Time--Second
C 6 id_string C 6 id_string Set Instrument ID Set Instrument ID
C 7 num C 7 num Set Number of Samples Set Number of Samples
C 8 hh C 8 hh
Set Sample Time-Hour. Set sample time in order of Set Sample Time-Hour. Set sample time in order of hours, minutes and hours, minutes and
seconds to avoid problems. seconds to avoid problems.
C 9 min C 9 min Set Sample Time-Minutes. Set sample time in order of hours, Set Sample Time-Minutes. Set sample time in order of hours,
minutes and seconds to avoid problems. minutes and seconds to avoid problems.
C 10 sec C 10 sec
Set Sample Time-Seconds. Set sample time in order of hours, Set Sample Time-Seconds. Set sample time in order of hours,
minutes and seconds to avoid problems. This comman minutes and seconds to avoid problems. This command returns a Range Error d returns a Range Error
if sec < 6, and min = 0, and hours = 0. if sec < 6, and min = 0, and hours = 0.
C 11 [1/0] C 11 [1/0] Set Sample Print on/off Set Sample Print on/off
C 12 hh C 12 hh Set Delay Time--Hours. Set delay between samples. Set Delay Time--Hours. Set delay between samples.
C 13 min C 13 min
Set Delay Time--Minutes. Set delay between samples. Set Delay Time--Minutes. Set delay between samples.
C 14 sec C 14 sec
Set Delay Time--Seconds. Set delay between samples. Set Delay Time--Seconds. Set delay between samples.
C 16 [1/0] C 16 [1/0] Set continuous (repeat) mode on/off. When turned off, the number Set continuous (repeat) mode on/off. When turned off, the number
of samples is set to 1. of samples is set to 1.
C 21 chan name C 21 chan name Set Analog ID Label. Set name for user analog channel 1-4 Set Analog ID Label. Set name for user analog channel 1-4
C C 22 22 chan chan min min Set Analog 4 mA value. Set user analog channel minimum Set Analog 4 mA value. Set user analog channel minimum
engineering unit value. engineering unit value.
C C 23 23 chan chan max max Set Analog 20 mA value. Set user analog channel maximum Set Analog 20 mA value. Set user analog channel maximum
engineering unit value. engineering unit value.
C 24 chan units C 24 chan units Set Analog Units. Set name for analog channel units. Set Analog Units. Set name for analog channel units.
C 25 chan [1/0] C 25 chan [1/0]
Enable/disable analog channel Enable/disable analog channel
C 32 hh C 32 hh
Set Purge Delay Time Hours Set Purge Delay Time Hours