Particle Measuring Systems LASAIR II 310, Руководство оператора

Страница: 165 / 231

Page Page C-2 C-2 LASAIR LASAIR II II Operator’s Operator’s Manual Manual
Appendix C: Downloading Data to Facility Net Appendix C: Downloading Data to Facility Net
Configuring LASAIR II to Communicate with Facility Net Configuring LASAIR II to Communicate with Facility Net
•• Ensure that the LASAIR II is not already connected to Facility Net (or to any Ensure that the LASAIR II is not already connected to Facility Net (or to any
other communications or control network).
other communications or control network).
••
Set LASAIR II to the unique IP address (i.e., Net Address and Mask) provided Set LASAIR II to the unique IP address (i.e., Net Address and Mask) provided
by your IT Dept. by your IT Dept.
•• V Verify LASAIR II is set to erify LASAIR II is set to the standard Multicast #: the standard Multicast #: 224.100.100.1. 224.100.100.1.
•• Enable the following fields in the LASAIR II's “Comm Setup - Network” Enable the following fields in the LASAIR II's “Comm Setup - Network”
screen: screen:
•• Re Rebo boot ot th the L e LAS ASAI AIR I R II. I.
Downloading the Data Downloading the Data
Case A: Case A: Mobile Collection of Sample Data from Multiple Locations Mobile Collection of Sample Data from Multiple Locations
1 1
Manually collect sample data with LASAIR II. Manually collect sample data with LASAIR II.
2 2
Connect the LASAIR II to Facility Net via Connect the LASAIR II to Facility Net via Ethernet ports on the LASAIR II and Ethernet ports on the LASAIR II and
the PC. the PC.
3 3
Configure Facility Net for LASAIR II. Configure Facility Net for LASAIR II.
4 4
Sampling points are automatically created for all LASAIR II location names, and Sampling points are automatically created for all LASAIR II location names, and
data are automatically downloaded to F
data are automatically downloaded to Facility Net. acility Net.
The user is offered the option of automatically or manually e The user is offered the option of automatically or manually erasing all historical rasing all historical
data in the LASAIR II. data in the LASAIR II.
Facility Net automatically disconnects from the LASAIR II. Facility Net automatically disconnects from the LASAIR II.
Case B: Case B: Fixed Collection of Sample Data from Single Location Fixed Collection of Sample Data from Single Location
1 1
Connect LASAIR II to Facility Net via Ethernet p Connect LASAIR II to Facility Net via Ethernet ports on the LASAIR II and the orts on the LASAIR II and the
PC. PC.
2 2
Configure Facility Net for the LASAIR II. Configure Facility Net for the LASAIR II.
Facility Net directs and controls periodic/continuous sampling b Facility Net directs and controls periodic/continuous sampling by the LASAIR II, y the LASAIR II,
and data are automatically downloaded and data are automatically downloaded to Facility Net in real time. to Facility Net in real time.
Historical data in the Historical data in the LASAIR II must be LASAIR II must be erased manually. erased manually.
Configuring Facility Net (or Pharmaceutical Net) for the LASAIR II Configuring Facility Net (or Pharmaceutical Net) for the LASAIR II
Ca Case se A: A: Fo For m r mob obil ile m e mon onit itor orin ing: g: 1) 1) “E “Ena nabl ble T e TCP CP/I /IP” P”
2) “TCP/IP Remote Mode” 2) “TCP/IP Remote Mode”
Ca Casse B e B:: Fo For f r fiixe xed m d mon onit itor oriing ng:: 1) 1) “E “Ena nabl ble T e TCP CP/I /IP” P” ON ONL LY Y..
1. 1.
Select Select
Configure > Instruments Configure > Instruments
..
2. 2.
Select Select
Add Add
, then select the , then select the
Add Network Add Network
tab. tab.