Recipe Setup Screen
Recipe Setup Screen
Page
Page
9-3
9-3
••
Flow: (Uni-directional/multi-directional) (FS-209E only)
Flow: (Uni-directional/multi-directional) (FS-209E only)
••
Room Area (Except
Room Area (Except A
Average)
verage)
••
Number of Locations to Sample
Number of Locations to Sample
••
Volume per Sample
Volume per Sample
••
Number of samples per location
Number of samples per location
Information not Saved for a
Information not Saved for a Stat
Statistics Recipe
istics Recipe
••
Statistics User Name
Statistics User Name
••
Sampling Setup Screen parameters. The number of samples is automatically
Sampling Setup Screen parameters. The number of samples is automatically
set when statistics are enabled, except for average mode. In average mode,
set when statistics are enabled, except for average mode. In average mode,
the current sample count is used if possible.
the current sample count is used if possible.
••
Alarm settings. By default alarms are disabled during statistics.
Alarm settings. By default alarms are disabled during statistics.
Recipe Setup Screen
Recipe Setup Screen
The recipe setup screen is located under the Sampling Setup Screen. From the
The recipe setup screen is located under the Sampling Setup Screen. From the
main
main display
display screen,
screen, select
select the
the
button
button (1st
(1st button).
button). Then
Then select
select the
the
button (5th button).
button (5th button).
The Recipe Setup Screen has the following two pages:
The Recipe Setup Screen has the following two pages:
••
The “Setup” page allows creating, deleting and printing recipes. Sampling
The “Setup” page allows creating, deleting and printing recipes. Sampling
recipes are displayed in cyan, and
recipes are displayed in cyan, and statistics recipes are shown in purple.
statistics recipes are shown in purple.
••
The “Locations” page allows recipes to be attached to location names.
The “Locations” page allows recipes to be attached to location names.
Recipe Setup Screen - Setup Page
Recipe Setup Screen - Setup Page
Use this screen to
Use this screen to create, delete, and print recipes. See
create, delete, and print recipes. See Figure
Figure 9-1, “Recipe
9-1, “Recipe
Setup Scr
Setup Screen, Setup Pa
een, Setup Page,” on page
ge,” on page 9-4.
9-4.
Control buttons are as follows:
Control buttons are as follows:
This button loads the highlighted recipe into the current settings for the
This button loads the highlighted recipe into the current settings for the
LASAIR II.
LASAIR II.
This button saves the current sampling pa
This button saves the current sampling parameters to a recipe. A prompt
rameters to a recipe. A prompt
for the recipe name is displayed
for the recipe name is displayed when this button is activated. The
when this button is activated. The
default name is whatever recipe is cu
default name is whatever recipe is currently highlighted. If an existing
rrently highlighted. If an existing
recipe name is used, the recipe is replaced with the n
recipe name is used, the recipe is replaced with the new parameters. A statistics
ew parameters. A statistics
recipe may be re-written with a sampling recipe, and vice-versa. A copy
recipe may be re-written with a sampling recipe, and vice-versa. A copy of this
of this
button is also on the Sampling Setup Screen for convenience in creating new
button is also on the Sampling Setup Screen for convenience in creating new
sampling recipes.
sampling recipes.
