Statistics Mode Operation
Statistics Mode Operation
LASAIR II Operator’s Manual
LASAIR II Operator’s Manual
Page
Page
8-13
8-13
5
5
Press
Press the
the green
green Start
Start button
button
on
on the
the control
control panel.
panel. The
The pump
pump begin
begin to
to
circulate air through the unit. After an initial delay
circulate air through the unit. After an initial delay (to purge the sample path),
(to purge the sample path),
the unit will begin sampling. The sampling process and the results of sampling
the unit will begin sampling. The sampling process and the results of sampling
can be observed on the
can be observed on the
Main Display
Main Display
. When the sample is complete, the pump
. When the sample is complete, the pump
stops.
stops.
When Sample Acknowledge is Activated
When Sample Acknowledge is Activated
If you have selected
If you have selected
Sample Acknowledge
Sample Acknowledge
, the following message will be
, the following message will be
displayed:
displayed:
Press the
Press the
Enter
Enter
key to accept the sample or use the right arrow button to move
key to accept the sample or use the right arrow button to move
to “No” and then press the Enter key to reject the sample.
to “No” and then press the Enter key to reject the sample. Rejected samples are
Rejected samples are
labelled as invalid and are not used in calculations. However, they are still
labelled as invalid and are not used in calculations. However, they are still
stored in memory and printed on the
stored in memory and printed on the final report.
final report.
Figure 8-3: Main Display Screen when Statistics Mode is Enabled
Figure 8-3: Main Display Screen when Statistics Mode is Enabled
Indicates that LASAIR II
Indicates that LASAIR II
is in statistics mode
is in statistics mode
The location that will be sampled next.
The location that will be sampled next.
