Viewing Sample Data
Viewing Sample Data
LASAIR II Operator’s Manual
LASAIR II Operator’s Manual
Page
Page
6-5
6-5
••
Row Index:
Row Index:
This number, which is
This number, which is always visible on the
always visible on the display
display, is useful
, is useful
for keeping track of your place
for keeping track of your place in the table. In addition, when p
in the table. In addition, when printing
rinting
samples the number shown in the row index is the sample which will be
samples the number shown in the row index is the sample which will be
printed. See Figure
printed. See Figure 6-2, “Data T
6-2, “Data Table Screen,” on page
able Screen,” on page 6-4
6-4
••
Date:
Date:
the date the sample was comp
the date the sample was completed in the format YYYY/MM/DD
leted in the format YYYY/MM/DD
••
Time:
Time:
the time the sample was completed in the format HH:MM:SS
the time the sample was completed in the format HH:MM:SS
••
Location:
Location:
the location name assigned to the sample data.
the location name assigned to the sample data.
••
Sample duration:
Sample duration:
the duration of the sample in the format HH:MM:SS
the duration of the sample in the format HH:MM:SS
••
Sample volume:
Sample volume:
the volume of air sampled
the volume of air sampled expressed in the units selected
expressed in the units selected
on the
on the
Data Display Screen.
Data Display Screen.
See
See
Figure
Figure 6-3, “Data T
6-3, “Data Table Display Setup
able Display Setup
Scr
Screen,” o
een,” on page
n page 6-6.
6-6.
••
Particle Data:
Particle Data:
the particle count data is displayed in your choice of the
the particle count data is displayed in your choice of the
following ways:
following ways:
➢
➢
raw counts
raw counts
or
or
normalized counts (particles per cubic foot or
normalized counts (particles per cubic foot or cubic
cubic
meter)
meter)
➢
➢
differential counts
differential counts
o
o
r cumulative counts
r cumulative counts
NOTE:
NOTE:
If Pharmaceutical mode is enabled, only 0.5
If Pharmaceutical mode is enabled, only 0.5
µ
µ
and 5.0
and 5.0
µ
µ
particles wil
particles willl
be displayed. See Appendix G for more information.
be displayed. See Appendix G for more information.
••
Analog data:
Analog data:
Analog data is listed under the
Analog data is listed under the standard headings of
standard headings of
T
T
for
for
temperature,
temperature,
r/h
r/h
for relative, and as many
for relative, and as many as four other user-selected
as four other user-selected
headings.
headings.
Invalid samples will cause the entire row of data to
Invalid samples will cause the entire row of data to be masked in gray.
be masked in gray.
Analog or particle alarms that occurred during the
Analog or particle alarms that occurred during the sample will cause the out-
sample will cause the out-
of-tolerance number to be displayed in red.
of-tolerance number to be displayed in red.
