Newport MM4006, Руководство пользователя

Страница: 30 / 411

MM4006 I n t r o d u c t i o n
In the above example, line number 6 displays the current function of the
function keys and line number 5 informs us that the controller is idle, wait-
ing for the operator to select an action.
Lines number 1, 2, 3 and 4 identify the axis number and display the current
position of each. Note that in the example, the controller detected that
there is no motion device connected to axis number 4 and displays the
message Unconnected.
When the controller is in some modes ( SETUP , FROG. , etc.), the first
four lines w i l l display specific information while the fifth o n e will be
reserved for helpful messages.
Menu Structure
A wide range of functions can be performed from the front panel. To fully
explore its capabilities, carefully read Section 2, Local Mode, and experi-
ment with the controller. This paragraph gives only a brief introductory
description of the menu structure.
The bottom line on the display (line 6) is dedicated to the four function
keys. An option description field will appear above each key if it has an
active function in the current menu. Pressing a key will perform the select-
ed command or will change the display to a new menu level. This capability
to navigate between a number of menu levels to get t o the desired com-
mand is the basis of the LOCAL mode operation.
Common Function Keys
Some of the function keys have the same definition in different menus. The
following descriptions list the most common keys and their functions.
DISPL. S w i t c h e s the display and front panel controls for the next o r previous 4-
axis.
QUIT T e r m i n a t e s the current operation and returns to the menu one level Up. In
most cases, any unsaved entries are ignored.
VALID A p p e a r s when an entry is required. It accepts the selected value and
advances the display to the next menu.
MODIFY A c t i v a t e s a lower-level menu that enables the user to make changes to the
currently displayed parameter.
UP S c r o l l s the display up through a list of parameters.
DOWN S c r o l l s the display clown through a list of parameters.
DELETE I s used when a numeric entry is required. It deletes the last character entered.
Note that for a value to be modified, it must first be activated and the
▶
sym-
bol must precede it.
NEXT S c r o l l s the display through a number of choices in the same menu level.
(%,
N e v v p o r t . 1 . 1 9
EI)110181En1020-03113