Newport MM4006, Руководство пользователя

Страница: 140 / 411

MM4006 C Y D e f i n e Y position to reach and build an
arc of circle = f (CX, CY)
Usage
■
1MM
■
PGM
❑
MIP
Syntax C Y n n
Parameters
Description n n [double] — Y coordinate to reach with an arc of circle.
Range n n — -1012 to 1012.
Units n n — Defined motion units.
Defaults n n M i s s i n g : E r r o r C.
Out of range: E r r o r C.
Description T h i s command defines to the controller Y position to reach and tells to the
controller to build an element of trajectory of the type:
Arc of circle = f(CX, CY).
Returns N o n e .
Errors C — Parameter out of limits.
H — Calculation overflow.
V - T o o long trajectory.
Type error (arc expected).
- Tr a j e c t o r y : Arc (r, 0) radius is too small.
A - Tr a j e c t o r y : Arc (r, 0) radius is too big.
Arc (x, y) circle too small.
e — Tr a j e c t o r y : Units not translational or not identical.
Rel. Commands C X — D e f i n e X position to reach with an arc of circle = f (CX, CY).
XE — T e l l the last element.
EL E r a s e the last element of trajectory.
Example N T I C l e a r trajectory.
CX10 I D e f i n e X position of an arc of circle = f (x, y).
CY10 I D e f i n e Y position an build an arc of circle = f (x; y).
XE T e l l last element.
XE, Arc (x, y), 10, 10, 90 I Controller tells the built element.
(%)
INevvport. 3 . 4 3
EDH0181En1020 — 03/03