Newport MM4006, Руководство пользователя

Страница: 203 / 411

MM4006 P E S e t end position of generation of pulses
of synchronization
Usage
■
IMM
■
PGM C MIP
Syntax x x P E n n or xxPE?
Parameters
Description x x [int]
nn [float]
Range
Units
Defaults
Axis number.
New value of end position of generation of pulses.
Read the actual end position of generation of pulses of
synchronization for the axis #xx.
xx 1 to 8.
nn M i n . logical allowed position to Max. logical allowed
position.
xx N o n e .
nn P r e s e t units in SETUP mode.
xx M i s s i n g :
Out of range:
Floating point:
nn M i s s i n g :
Out of range:
Error B.
Error B.
Error A.
0.
Error C.
Description T h i s command sets end position of generation of pulses of synchronization
for an axis.
The command can be sent at any time but it has no effect until the PS com-
mand is received.
Returns I f the sign "?" takes place of the nn value, this command reports the end
position of generation of pulses of synchronization for xx numbered axis.
Errors
A —
B —
C —
Unknown message code.
Incorrect axis number.
Parameter out of limits.
Rel. Commands P B - S e t start position of generation of pulses of synchronization.
P1 - S e t step of generation of pulses of synchronization.
Example 2PE10 I S e t end position for axis #2 to 10 units.
2PE? I A c t u a l value of PE ?
2PE20 I Controller tells the actual value.
2PS I U p d a t e PB, PE, P1 and allow pulses.
2PE? I A c t u a l value of PE .2
2PE10 Controller tells the value.
(%)
ED110181En1020— 03/03
3.106 N e v v p O r t .