Newport MM4006, Руководство пользователя

Страница: 188 / 411

MM4006
NB S e t trajectory element
where the generation of pulses starts
Usage
■
IMM
■
PGM U MIP
Syntax N B n n or NB?
Parameters
Description n n [ i n t ] N u m b e r of trajectory element where the pulses genera-
tion commences.
— Read the number of trajectory element where the puls-
es generation starts.
Range n n — 1 to 100.
Units n n — None.
Defaults n n M i s s i n g : I .
Out of range: E r r o r C.
Description T h i s command sets number of trajectory element where the generation of
pulses commences. The generation of pulses is started immediately in the
beginning of this element.
Returns
Errors
NOTE
As the total element number of a trajectory may be inferior than 100 and
the value of NB must be s the value of NE s the total element number,
this value of NB will be reexamined in NS and ET commands.
If the sign "?" takes place of the an value, this command reports the num-
ber of trajectory element where the generation of pulses commences.
A U n k n o w n message code.
B I n c o r r e c t axis number.
C P a r a m e t e r out of limits.
D U n a u t h o r i z e d execution.
Rel. Commands N E
NI
NN
Example N B 3 I
NB? I
NB3 I
Set trajectory element where the generation of pulses ends.
Set step (curvilinear distance) between Synchronization pulses.
Set number of synchronization pulses to generate.
Generation of pulses starts at the beginning of the element #3.
Read element number where the generation of pulses starts.
Controller tells the value.
c v
Newport. 3 . 9 1
EDH0181En 1020 — 03/03