Newport MM4006, Руководство пользователя

Страница: 63 / 411

MM4006 L o c a l Mode
Display Resolution
This menu modified axis position (digit number after decimal point). The con-
troller used this parameter to adjust exactly the mechanical displacement.
To change the Display Resolution, press the MODIFY key. Use the numeric
keypad to enter a new value and then press VALID t o confirm the setting
and return to the previous menu.
0 0 0 NV V* %ssaaaamwawaWI
412
Axis SetupI ' MODIFY * U P ' MODIFY
QUIT Q U I T Y E S QUIT
VALID *
NP — S e t display resolution.
Backlash
This parameter represents the mechanical hysteresis of motion device. Use
good judgment when setting this parameter.
To change the backlash parameter, press the MODIFY key. Use the numeric
keypad to enter a new value and then press VALID t o accept the setting
and return to the previous menu.
If you have been following the Axes Setup procedure from the beginning of
the section, pressing the
U P k e y will bring you back to the first para-
meter that was discussed. Exit the Axes Setup by pressing the QUIT k e y.
Axis Setup
QUIT
MODIFY *
* MODIFY * - ' VALID - *
BA — S e t mechanical backlash.
Maximum Error
This parameter represents the maximum allowed following error. If, at any
time, the following e r r o r exceeds this value, t h e controller stops all
motions in progress and turns the motor power off. Use good judgment
when setting this parameter. A small value will cause premature fault and a
large value will not protect the system from a real problem.
To change the Maximum Error parameter, press the MODIFY key. Use the
numeric keypad to enter a new value and then press VALID t o accept the
setting and return to the previous menu.
If you have been following the Axes Setup procedure from the beginning of
the section, pressing the
u p k e y will bring you back to the first para-
meter that was discussed. Exit the Axes Setup by pressing the key.
( )
E0110181En1020 — 03/03
2.20 R 4 e v v p o r t .