Newport MM4006, Руководство пользователя

Страница: 38 / 411

MM4006
Introduction
0.000 m m
0.000 D e g
0.0000 mm
connected
Fig. 1.12 — Display after initial power up.
NOTE
If, instead of a screen similar to Fig. 1.12 you see a different message,
this means that the controller has detected an error.
See Appendix A, Error Messages and Appendix E, Troubleshooting
Guide.
NOTE
If the display looks like Fig. 1.16 but in a wrong language, follow these
steps:
1 Assume the following labeling convention for the function keys:
1 2 3 4
2 F r o m the top level MOTOR m e n u , press the function keys in this
sequence:
4 3 3
3 Press function key 2 u n t i l the desired language appears.
4 P r e s s function k e y 4 t h r e e times t o r e t u r n t o the t o p level
menu.
1.4.3 V e r i f y i n g Default Devices
Before powering the motors, verify that the controller is configured for the
actual motion devices it is supposed to drive.
From the main motor off menu, press the SETUP f u n c t i o n key.
The top-level setup menu will indicate on the first four lines the type of
motion device each axis is configured for. The display should look similar
to Fig. 1.13. Depending on your system configuration, different models will
be listed.
SETUP MENU.
AXES F, G E N .
Fig. 1.13 — Typical display slowing connected devices.
( % )
N l e v v p o r t . 1 . 2 7 E D I 10 181 En 10210 — 0 3 / 0 3