Mitsubishi Electric C80 Series, Руководство пользователя

Страница: 366 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
349 IB-1501279-H
Set the override value when leaving the tap end point in the synchronous tapping cycle.
When "0" is set, 100 % is applied for the operation.
---Setting range---
0 to 999 (%)
Set the skip signal for ending the G04 (dwell) command.
PLC interface input signal
Skip3 Skip2 Skip1
0 : - - -
1 : - - *
2 : - * -
3 : - * *
4 : * - -
5 : * - *
6 : * * -
7 : * * *
(* : Enable - : Disable)
Set the feedrate when there is no F command in the program at G31 (skip) command.
---Setting range---
1 to 999999 (mm/min)
Designate the skip signal in multi-step skip G31.1.
The setting method is same as "#1173 dwlskp".
Set the skip feedrate in multi-step skip G31.1.
---Setting range---
1 to 999999 (mm/min)
Set the skip signal in multi-step skip G31.2.
The setting method is same as "#1173 dwlskp".
Set the skip signal in multi-step skip G31.2.
---Setting range---
1 to 999999 (mm/min)
Set the skip signal in multi-step skip G31.3
The setting method is same as "#1173 dwlskp".
Set the skip signal in multi-step skip G31.3.
---Setting range---
1 to 999999 (mm/min)
#1172 tapovr Tap return override
#1173 dwlskp G04 skip condition
#1174 skip_F G31 skip speed
#1175 skip1 G31.1 skip condition
#1176 skip1f G31.2 skip speed
#1177 skip2 G31.2 skip condition
#1178 skip2f G31.2 skip speed
#1179 skip3 G31.3 skip condition
#1180 skip3f G31.3 skip speed