Mitsubishi Electric C80 Series, Руководство пользователя

Страница: 479 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
462 IB-1501279-H
Specify how many part systems to display on a screen.
0 : The same number as that of the enabled part systems
1 or greater: The number specified by this parameter serves as that of the part systems to display.
(Note) The setting range differs according to the NC model.
For the number of part systems displaying in the operating state, follow this parameter setting.
---Setting range---
0 to 8
Set this parameter to 1 if you wish to disable the workpiece coordinate system shift function.
0: Enable the workpiece coordinate shift function
1: Disable the workpiece coordinate shift function
Set the No. of F device to specify the displayed operator message.
Device specified with this parameter is treated as No.1, and displays up to 4 operator messages correspond-
ing to F device that is ON.
This parameter is valid when #6455/bit3 is 0.
(Note 1) Use from F1024 when 0 is set.
(Note 2) Set the device No. to be a multiple of 32. When other value is input, a setting error occurs.
---Setting range---
0 to 2016
[M8]
Select whether to enable the remote communication.
0: Disabled
1: Enabled
[C80]
Not used.
Select the screen theme colors.
This selection affects the colors of the entire screen.
0: Standard colors (gray tone)
1: Blue tone
[M8]
Specify how many EcoMonitorLight units (an energy meter made by Mitsubishi Electric for measuring the
consumption and regeneration) are connected to the CNC.
---Setting range---
0 to 16
Default 0
[C80]
Not used.
#11055 Disp. sysno Number of part systems to display
(PR) #11056 Workshift invalid Workpiece coordinate system shift OFF (For L system
only)
(PR) #11058 plc_opemsg0 Operator messages display device
(PR) #11059 Remote comm enable Remote connect enabled
(PR) #11060 Screen theme color Select screen theme colors
(PR) #11061 Num of EcoMonitors The Number of EcoMonitorLight connected to CNC