Mitsubishi Electric C80 Series, Руководство пользователя

Страница: 640 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
623 IB-1501279-H
Set in which axis direction to rotate the table rotating type base-side rotary axis.
If the tool axis is inclined, use the second digit to set the axis direction in which the tool axis is inclined.
0: Invalid
1: I axis rotation
2: J axis rotation
3: K axis rotation
(Note) 0 to 99 can be set from the screen, but if an invalid value is set, the operation error (M01 0127) will
occur when the power supply is turned ON.
---Setting range---
0 to 3
12, 13, 21, 23, 31, 32
Set the inclination angle if the table-rotation type base-side rotary axis is inclined. Set the angle regarding
CCW direction of the inclined plane as plus direction.
---Setting range---
-359.999 to 359.999 (°)
(Follow as "#1003 iunit Input setup unit".)
Set the name of the table rotating type base-side rotary axis.
---Setting range---
A,B,C,U,V,W,X,Y,Z
2-digit of A to Z and 1 to 9
0: Mechanical axis specifications
[M8]
Set the rotation direction for the table rotating type base-side rotary axis.
The rotation direction specifications vary according to the setting of "#1450 5axis_Spec/bit3" (Select specifi-
cations of rotation direction parameter).
- When "#1450 5axis_Spec/bit3" = "0"
The specifications vary for each function.
- When "#1450 5axis_Spec/bit3" = "1"
The specifications are common to the functions.
0: When the tool motion viewed from the workpiece is in right-hand screw direction, it is taken as the pos-
itive direction.
1: When the tool motion viewed from the workpiece is in left-hand screw direction, it is taken as the positive
direction.
When all axes are at the machine zero point, set the distance in the horizontal axis direction from the machine
zero point to the rotation center of the base-side rotary axis.
---Setting range---
-99999.999 to 99999.999 (mm)
When all axes are at the machine zero point, set the distance in the vertical axis direction from the machine
zero point to the rotation center of the base-side rotary axis.
---Setting range---
-99999.999 to 99999.999 (mm)
When all axes are at the machine zero point, set the distance in the height axis direction from the machine
zero point to the rotation center of the base-side rotary axis.
---Setting range---
-99999.999 to 99999.999 (mm)
(PR) #7940 SLCT_W1 Rotary axis selection
(PR) #7941 TIANGW1 Inclination angle
(PR) #7942 ROTAXW1 Rotary axis name
#7943 DIR_W1 Rotation direction
#7944 COFSW1H Horizontal axis rotation center offset
#7945 COFSW1V Vertical axis rotation center offset
#7946 COFSW1T Height axis rotation center offset