Mitsubishi Electric C80 Series, Руководство пользователя

Страница: 401 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
384 IB-1501279-H
Set the number of groups to be displayed on the tool life management II (L system) screen.
0: Displayed group count 1, maximum number of registered tools: 16
1: Displayed group count 2, maximum number of registered tools: 8
2: Displayed group count 4, maximum number of registered tools: 4
Set the M code for tool life management II (L system) re-count.
---Setting range---
0 to 99
Select the enable conditions for the user macro interrupt signal (UIT).
0: Enable when interrupt signal (UIT) turns ON
1: Enable when interrupt signal (UIT) is ON
Select the performance after user macro interrupt signal (UIT) input.
0: Execute interrupt program without waiting for block being executed to end
1: Execute interrupt program after completing block being executed
Select whether to clear statements other than specified arguments by macro call.
Also select whether to clear local variables by power-ON and resetting.
0: Clear the non-specified arguments by macro call.
1: Hold non-specified arguments by macro call
2: Hold non-specified arguments by macro call, and clear local variables by power-ON and resetting
Set the number of waits for retract when chamfering is OFF in thread cutting.
---Setting range---
0 to 99 (Approx. 4 ms)
Standard setting value: 4
Enable this function when disabling the soft limit check function at the second to fourth reference position
return.
0: Enable soft limit function
1: Disable soft limit function
Not used.
Select one of the following two methods:
- Set the current length of tools on each facing turret.
- Set a value, assuming that the tools on each facing turret are in the same direction as that of those on the
base turret.
0: Current length of the tools on each facing turret
1: Value, assuming that the tools on each facing turret are in the same direction as that of those on the
base turret
Select whether to enable the mirror image of each facing turret with the T command.
0: Disable
1: Enable
#1107 Tllfsc Split life management display screen (for L system on-
ly)
#1108 TlrectM Life management re-count M code (for L system only)
(PR) #1112 S_TRG Validate status trigger method
(PR) #1113 INT_2 Validate interrupt method type 2
#1114 mcrint Macro argument initialization
#1115 thwait Waiting for retract
#1116 G30SLM Invalidate soft limit (manual operation)
(PR) #1117 H_sens
#1118 mirr_A Select how to set up the length of tools on cutter tables
(opposed tables) (for L system only)
#1119 Tmiron Select the mirror image of each facing turret with T com-
mand (for L system only)