Mitsubishi Electric C80 Series, Руководство пользователя

Страница: 362 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
345 IB-1501279-H
Select the PLC interface setting and display increment.
The PLC interface setting and display increment will follow this specification. Note that the PLC axis will follow
"#1003 iunit".
---Setting range---
[M8]
B : 1 μ m
C : 0.1 μ m
D : 0.01 μ m (10nm)
E : 0.001 μ m (1nm)
[C80]
B : 1 μ m
C : 0.1 μ m
Select the machine error compensation setting and display increment.
The parameters related to machine error compensation (backlash, pitch error compensation, etc.) and PLC
interface (external machine coordinate system compensation) will follow this selection.
---Setting range---
[M8]
B : 1 μ m
C : 0.1 μ m
D : 0.01 μ m (10nm)
E : 0.001 μ m (1nm)
[C80]
B : 1 μ m
C : 0.1 μ m
Select the NC system type.
0: Machining center system (M system)
1: Lathe system (L system)
(Note 1) If the setting value is out of range, M system will be selected.
Select the plane to be selected when the power is turned ON or reset.
When 0 is specified, 1 is assumed (X-Y plane).e model and specifications.
1: X-Y plane (G17 command state)
2: Z-X plane (G18 command state)
3: Y-Z plane (G19 command state)
Set the names of the basic axes that compose the plane.
Set the axis name set in "#1013 axname".
If all three items ("base_I", "base_J" and "base_K") do not need to be set, such as for 2-axis specifications,
input "0", and the parameter will be blank.
Normally, when X, Y and Z are specified respectively for base_l, _J, _K, the following relation will be estab-
lished:
G17: X-Y
G18: Z-X
G19: Y-Z
Specify the desired axis name to set an axis address other than above.
---Setting range---
Axis names such as X, Y or Z
(PR) #1005 plcunit PLC unit
(PR) #1006 mcmpunit Machine error compensation unit
(PR) #1007 System type select System type select
#1025 l_plane Initial plane selection
#1026 base_I Base axis I