Mitsubishi Electric C80 Series, Руководство пользователя

Страница: 341 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
324 IB-1501279-H
Standard length for machining condition selection I
Set the standard length for the machining condition selection I function. This is equivalent to the parameter
#8091 StdLength.
---Setting range---
0 to 100.000 (mm)
Step width for machining condition selection I
Set the width of the step for the machining condition selection I function. This is equivalent to the parameter
#8093 StepLeng.
---Setting range---
-1.000 to 0.100 (mm)
Set the tolerance for machining condition selection parameter group for machining condition selection I func-
tion.
This is equivalent to the parameter "#2659 tolerance".
---Setting range---
0 to 100.000 (mm)
[M8]
Specify the maximum speed for the machining condition parameters of the machining condition selection I
function (equivalent to #1206 G1bF).
---Setting range--
1 to 1000000 (mm/min)
[M8]
Specify the tolerance control soft acceleration/deceleration filter 2 for the machining condition parameters of
the machining condition selection I function (equivalent to #12070 Sfilt2_tol).
---Setting range---
0 to 200 (ms)
Time constant for machining condition selection I
Set the time constant for the machining condition selection I function. This is equivalent to the parameter
#1207 G1btL.
---Setting range---
Without high-accuracy control time constant expansion: 0 to 5000 (ms)
With high-accuracy control time constant expansion: 0 to 30000 (ms)
G01soft acceleration/deceleration filter for machining condition selection I
Set the G01 soft acceleration/deceleration filter's time constant for the machining condition selection I func-
tion. This is equivalent to the parameter #1568 SfiltG1.
---Setting range---
0 to 200 (ms)
#42017 P1-std_length Standard length for machining condition selection I
#42018 P1-step_length Step width for machining condition selection I
#42019 P1-tolerance Tolerance for machining condition selection I
#42020 P1-G1bF Machining condition selection I: maximum speed
#42021 P1-Sfilt2_tol Machining condition selection I: tolerance control soft
accel/decel filter 2
#42301 P2-G1btL Time constant for machining condition selection I
#42302 P2-SfiltG1 G01soft acceleration/deceleration filter for machining
condition selection I