Mitsubishi Electric C80 Series, Руководство пользователя

Страница: 396 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
379 IB-1501279-H
16.3 Base Common Parameters
Not used. Set to "0".
Select the number of spindles.
0: No spindle
1 to 8: One to eight spindles
(Note) The setting range differs according to the model.
Select the unit system for setting and display regarding machine parameter and PLC interface's position,
length and speed.
0: Metric system
1: Inch system
Select the unit system for the program travel amount when the power is turned ON or reset and for position
display.
0: Metric system
1: Inch system
(Note) The units of the following data are converted by "#1041 I_inch".
- Command unit at power ON and reset (Inch/metric command mode)
But under the following conditions, the unit will follow G20/G21 command modal even at reset.
When reset modal is retained ("#1151 rstint"="0")
When G code group 06 reset modal is retained ("#1210 RstGmd/bit5" ON)
- Unit system for position display (counter, user parameter, tool, work offset)
- User parameter I/O unit
- Parameter unit of user parameters concerning length and speed
- Arc error parameter (#1084 RadErr)
Select the unit system for the commands to the PLC axis.
0: Metric system
1: Inch system
#1038 plcsel Ladder selection
(PR) #1039 spinno Number of spindles
(PR) #1040 M_inch Constant input (inch)
(PR) #1041 l_inch Initial state (inch)
(PR) #1042 pcinch PLC axis command (inch)