Mitsubishi Electric C80 Series, Руководство пользователя

Страница: 222 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
205 IB-1501279-H
Set the distance between the measurement point and deceleration start point.
---Setting range---
0 to 99999.999 (mm)
Set the tolerable range of the measurement point.
An alarm will occur when the sensor signal turns ON before the range, set by this parameter, has not been
reached from the measurement point, or when the signal does not turn ON after the range is passed.
---Setting range---
0 to 99999.999 (mm)
Set the override value for automatic corner override.
---Setting range---
0 to 100 (%)
Set the maximum corner opening angle where deceleration should start automatically.
When the angle is larger than this value, deceleration will not start.
---Setting range---
0 to 180 (°)
Set the position where deceleration starts at the corner.
Designate at which length point before the corner deceleration should start.
---Setting range---
0 to 99999.999 (mm)
Set the maximum value when inputting the tool compensation amount.
A value exceeding this setting value cannot be set.
Absolute value of the input value is set.
(If a negative value is input, it is treated and set as a positive value.)
If "0" is input, this parameter will be disabled.
---Setting range---
0 to 9999.999 (mm)
(Input setting increment applies)
Set the maximum value for when inputting the tool compensation amount in the incremental mode.
A value exceeding this setting value cannot be set.
Absolute value of the input value is set.
(If a negative value is input, it is treated and set as a positive value.)
If "0" is input, this parameter will be disabled.
---Setting range---
0 to 9999.999 (mm)
(Input setting increment applies)
Path recognition range
Specify the range to recognize the tool paths adjoining to the command position when the smooth fairing
function is ON.
If "0" is set, the range will be 1.000 (mm).
---Setting range---
0 to 100.000 (mm)
#8005 ZONE r
#8006 ZONE d
#8007 OVERRIDE
#8008 MAX ANGLE
#8009 DSC. ZONE
#8010 ABS. MAX.
#8011 INC. MAX.
#8038 Path recog. range