Mitsubishi Electric C80 Series, Руководство пользователя

Страница: 346 / 748

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
329 IB-1501279-H
Chord error 2 for machining condition selection I
Set the chord error 2 for the machining condition selection I function. This is equivalent to the parameter
#8028 Toler-2.
---Setting range---
0.000 to 100.000 (mm)
Fine segment length for machining condition selection I
Set the fine segment length for the machining condition selection I function. This is equivalent to the param-
eter #8030 MINUTE LENGS.
---Setting range---
-1 to 127 (mm)
Fairing ON for machining condition selection I
Set whether to enable the fairing function for the machining condition selection I function. This is equivalent
to the parameter #8033 Fairing ON.
---Setting range---
0/1
Fairing L for machining condition selection I
Set the fairing length for the machining condition selection I function. This is equivalent to the parameter
#8029 FairingL.
---Setting range---
0 to 100.000 (mm)
Corner judgment length for machining condition selection I
Set the corner judgment length for the machining condition selection I function. This is equivalent to the pa-
rameter #8037 CorJudgeL.
---Setting range---
0 to 99999.999 (mm)
SSS/EasySSS control ON for machining condition selection I
Set whether to enable the SSS/EasySSS control for the machining condition selection I function. This is
equivalent to the parameter #8090 SSS ON.
---Setting range---
0/1
Standard length for machining condition selection I
Set the standard length for the machining condition selection I function. This is equivalent to the parameter
#8091 StdLength.
---Setting range---
0 to 100.000 (mm)
Step width for machining condition selection I
Set the width of the step for the machining condition selection I function. This is equivalent to the parameter
#8093 StepLeng.
---Setting range---
-1.000 to 0.100 (mm)
#42611 P3-distth2 Chord error 2 for machining condition selection I
#42612 P3-minute Fine segment length for machining condition selection I
#42613 P3-fairing Fairing ON for machining condition selection I
#42614 P3-minleng Fairing L for machining condition selection I
#42615 P3-cordeclen Corner judgment length for machining condition selec-
tion I
#42616 P3-sss_prcm SSS/EasySSS control ON for machining condition se-
lection I
#42617 P3-std_length Standard length for machining condition selection I
#42618 P3-step_length Step width for machining condition selection I