Kikusui PAT160-25T, Руководство по эксплуатации

Страница: 121 / 218

PAT-T 4KW
7-15
7
Remot
e
Cont
ro
l
7.6 Command Description in This Manual
This manual describes the commands in the following manner.
Table 7-7 Command items and reference pages
CURR :PR OT
Sets the o v erc u rrent protection (OC P ) v al u e.
Command
[SOURce:] CURRent :PROTection [ : LEVel] { <numeric> | M IN|MAX }
[SOURce:] CURRent :PROTection [ : LEVel] ? [MIN|MAX]
Parameter
V alue:
10 % to 111.5 % of the rated output current
(The default v alue is 111.5 % of the rated output current.)
Unit:
A
W hen * RST is sent, the o v erc u rrent protection is set as sho w n in Table A-16.
Response
Ret u rns the OC P v al u e in the NR3 form in response to CURR :P ROT ? .
Attach the v alue you want to specify after
the command and send the command.
To set the o
v ercurrent protection to 100
A, send CURR:PROT 100.
The parameters are listed.
In the case of this command, the
parameter is numeric. In addition to
specifying the desired
v alue, you can
specify the minimum or maximum v alue.
The commands are gi v en in the
long form.
The lower-case section can
b e
omitted.
The section enclosed
b y b races ([])
can also b e omitted.
The selecta b le range is gi v en.
Optional sym b ols such as m and
µ
can also b e used.
The unit for the v alue. The unit can
b e omitted.
This command is affected if *RST is
sent, and the setting changes to the
v alue indicated in Ta b le A-16. The
o v ercurrent protection is changed
to 111.5 % of the rated output
v oltage if *RST is sent.
Specify MAX to set the maximum v alue.
Specify MIN to set the minimum v alue.
The representation system of the v alue
that is returned when a q uery is sent.
Item
Page
Command syntax 7-11
Parameters 7-13
Unit 7-14
Table A-16 A-10
Q u ery 7-12
Representation system 7-13
List of messages A-2
List of errors A-7
T u torial A-16
Sample program A-27
See