Kikusui PAT160-25T, Руководство по эксплуатации

Страница: 76 / 218

5-4
PAT-T 4kW
Table 5-2 connector pin arrangement
Pin N o. Signal N ame Description
1
STATUS COM
Common for stat u s signals from pin 3 thro u gh 7.
*1
2
STATUS COM
Common for stat u s signals from pin 3 thro u gh 7.
*1
3
PWR O N /OFF
STATUS
*2
PWR O N STATUS (CF23: 0): O u tp u t a lo w level signal w hile the po w er is on.
PWR OFF STATUS (CF23: 1): O u tp u t a lo w level signal w hen the po w er is off.
(open collector o u tp u t by a photoco u pler
*3
)
4
OUT O N STATUS
On w hen the o u tp u t is on (open collector o u tp u t by a photoco u pler
*3
).
5
ALM STATUS T u rns on w hen the OVP, OCP, OHP, PHASE, SE N SE, FA N , or BOHP is activated or
w hen a sh u tdo w n signal is applied (open collector o u tp u t by a photoco u pler).
*3
6
CC STATUS
On d u ring CC operation (open collector o u tp u t by a photoco u pler
*3
).
7
CV STATUS
On d u ring CV operation (open collector o u tp u t by a photoco u pler
*3
).
8 AUX Reserved.
9 AUX Reserved.
10 I SUM I N C u rrent signal inp u t terminal in Master-Slave Parallel Operation
11
D COM
Digital signal common for pins 12 and 14
*1
When the remote sensing is u sed, connect the cable to the ne gative electrode (-S)
of the sensing inp u t, and w hen the remote sensing is not u sed, conn
ect the cable to
the negative (-) o u tp u t (same as pin 13).
12
SHUT DOW N Sh u tdo w n (trips the POWER s w itch or t u rns the o u tp u t off w hen a lo w TTL level signal
is applied. The internal circ u it is p u lled u p to +5 V thro u gh 10 k
Ω
).
13 D COM Same as pin 11.
14
OUT O N /OFF
CO N T
O u tp u t on/off terminal
T u rn off w hen a lo w (or high) TTL level signal is applied. The internal circ u it is
p u lled u p to +5 V thro u gh 10 k
Ω
.
15
A COM
Analog signal common for pins 16, 1 8 , 20, and 22.
*1
Connected to the negative electrode (-S) of the sensing inp u t w hen remote sensing is
u sed; connected to - (neg.) o u tp u t w hen remote sensing is not u sed.
(Same as pins 17, 19, 21, and 23.)
16 I MO N O u tp u t c u rrent monitor (O u tp u ts 0 % to 100 % of the rated c u rrent u sing 0 V to 10 V).
17 A COM Same as pin 15.
1 8 V MO N O u tp u t voltage monitor (O u tp u ts 0 % to 100 % of the rated voltage u sing 0 V to 10 V).
19 A COM Same as pin 15.
20
EXT CC CO N T External voltage control of o u tp u t c u rrent (0 % to 100 % of the rated o u tp u t voltage
u sing 0 V to 10 V) or external resistance control of o u tp u t c u rrent.
• 0 % to 100 % of the rated o u tp u t c u rrent in the range of 0 k
Ω
to 10 k
Ω
(CF21: 2)
• 100 % to 0 % of the rated o u tp u t c u rrent in the range of 0 k
Ω
to 10 k
Ω
(CF21: 3)
21 A COM Same as pin 15.
22
EXT CV CO N T External voltage control of o u tp u t voltage (0 % to 100 % of the rated o u tp u t voltage
u sing 0 V to 10 V) or external resistance control of o u tp u t voltage.
• 0 % to 100 % of the rated o u tp u t voltage in the range of 0 k
Ω
to 10 k
Ω
(CF20: 2)
• 100 % to 0 % of the rated o u tp u t voltage in the range of 0 k
Ω
to 10 k
Ω
(CF20: 3)
23 A COM Same as pin 15.
24 PRL I N COMP Correction signal inp u t terminal d u ring master-slave parallel operation.
25 PRL I N - N egative electrode inp u t terminal d u ring master-slave parallel operation.
26 PRL I N + Positive electrode inp u t terminal d u ring master-slave parallel operation.
*1. Use the shortest possible w ires for the common w ires.
*2. Stat u s signal setting of the po w er on/off (CF23): Either one specified in the CO N FIG settings is activated.
*3. Open collector o u tp u t: Maxim u m voltage of 30 V and maxim u m c u rrent of 8 mA. It is ins u lated from
the control circ u it.
25
26
9
10
21
22
17
18
14
1 2
5 6
J1