Kikusui PAT160-25T, Руководство по эксплуатации

Страница: 46 / 218

4-4
PAT-T 4kW
• Setting display of the overvoltage and overcurrent protection
Press the OVP•OCP key. The key illuminates. The present overvoltage and
overcurrent settings are displayed.
Fig.4-3 Setting display example of the overvoltage and
overc
u rrent protection
• Setting display of the system configuration
Press the CONFIG key. The key LED illuminates.The system configuration
settings are displayed.
Fig.4-4 Setting display example of the system config u ration
4.3 Output Operation
The OUTPUT switch is a toggle switch.
When you press the OUTPUT switch and the output turns on, the OUTPUT LED
illuminates. When you press the OUTPUT switch and the output turns off, the
OUTPUT LED turns off.
If the output is turned on, the present setting is output. If you change the setting
while the output is on, the change is applied to the output.
p. 5-17
It is possible to control on/off of the output by external control.
Fig.4-5 O u tp u t on display example
Output on/off when power is turned on
By factory default, the output is off when the power is turned on. You can set the
output state at power-on to on (CF25: ON) in the CONFIG settings.
If you set the output state at power-on to on, check the OVP trip point setting before
you turn off the POWER switch.
If the breaker trip setting that is applied when an OVP or OCP activates is set to
“trip” (CF28: ON) and the OVP trip point is set lower than the output voltage
setting, the OVP will activate every time you turn the POWER switch on and the
POWER switch will turn off.
EXT EXT
RMT
LOCK
PRESET A B C
A V
OUTPUT
ALARM
Lights on
EXT EXT
RMT
LOCK
PRESET A B C
A V
OUTPUT
ALARM
On
See
EXT EXT
RMT
LOCK
PRESET A B C
A V
OUTPUT
ALARM
C V
Lights on