Kikusui PAT160-25T, Руководство по эксплуатации

Страница: 115 / 218

PAT-T 4KW
7-9
7
Remot
e
Cont
ro
l
Fig.7-3 REBOOT s w itch and LA N reset s w itch
■
REBOOT switch
When you keep pressing the "REBOOT" switch for more than 2 seconds, the LAN
will reboot. However, the setting condition of LAN interface will not be changed.
■
LAN reset switch
When you keep pressing the "LAN RESET" switch for more than 2 seconds, all of
the setting of LAN interface returns to the factory default setting. It can be used
when neither the security password nor IP address are forgotten.
Either switch doesn't reflect to the panel setting of the product. In case the product is
in the state of remote mode, it can be switched (from the panel operation) to the
local mode.
• There are possible damage on the equipment or an electric shock.
The LAN interface can be accessed from any place on the network.
Set the security when it is necessary.
Security can be set by the password protection and the host
limitation by IP address. Refer to Appendix “A.5 Access and
Operation for the Built-in Web site (LAN interface)" for setting
procedure.
• Do not touch neither REBOOT switch nor LAN reset switch inadvertently while
the automatic measurement system is in operation. It may cause to mis-
operation.
• The LAN interface should be shifted remotely by the command unlike other
interfaces. Set it by the SCPI command "SYSTem:REMote" to the remote state.
When you do a remote programming, transmit this command to the front of the
program.
LAN RESET
REBOOT
LAN
NON AUTO-MDIX
NB01334-1
REBOOT switch
LAN reset switch
*
Push here b y using a fiine point tool
WARNING