Kikusui PAT160-25T, Руководство по эксплуатации

Страница: 147 / 218

PAT-T 4KW
7-41
7
Remot
e
Cont
ro
l
7.15 System Settings
SYST:ERR
Reads the oldest error information or event information from the error queue. The
error queue can store up to 255 errors.
The error queue is cleared using the *CLS command.
Command
SYSTem:ERRor[:NEXT]?
Response
Returns the oldest error or event information in the error/event queue in response to
SYST:ERR? as follows:
(Example) When there is no error or event
Returns 0, “No error”.
(Example) When a command that cannot be executed in the current operating
condition is received
Returns -221, “Settings conflict”.
SYST:KLOC
Sets/Releases the panel operation lock.
Command
SYSTem:KLOCk {ON|OFF|1|0}
SYSTem:KLOCk?
Parameter
Val u e: ON (1) Lock the panel operation
OFF (0) Release the panel operation lock
Response
Returns the panel operation lock setting in the NR1 form in response to
SYST:KLOCk?.
SYST:LOC (RS232C, USB and LAN only)
Sets the PAT operation to local mode (panel operation). This is a substitute
command for the IEEE488.1 REN message (Remote Disable).
Command
SYSTem:LOCal