Kikusui PAT160-25T, Руководство по эксплуатации

Страница: 186 / 218

A-6
PAT-T 4kW
Table A-9 IEEE4 88 .2 common commands
IEEE4 88 .2
common
command
Parameter Description R/W
*CLS Clears all the event registers. W
*ESE N R1 Sets the event stat u s enable register bits. R/W
*ESR Q u eries the event stat u s register. R
*ID N Q u eries the identification string (man u fact u rer information). R
*OPC
Ca u ses the device to generate the operation complete message in the
event stat u s register w hen all pending selected device operations have
been finished.
R/W
*OPT Q u eries the hard w are interface board that is installed R
*PSC 0 | 1 Initializes *ESE and *SRE. R/W
*RST
Performs a device reset. Config u res the PAT to a kno w n condition
independent from the u sage history of the device.
W
*SRE N R1 Sets the service req u est enable register bits. R/W
*STB Reads the stat u s byte and master s u mmary stat u s bits. R
*TRG Trigger command W
*TST Exec u tes a self-test R
*WAI
Prevents the device from exec u ting s u bseq u ent commands or q u eries
u ntil the N o Operation Pending flag becomes tr u e.
W