Kikusui PAT160-25T, Руководство по эксплуатации

Страница: 207 / 218

PAT-T 4kW
A-27
Appx
A.7 Sample Programs
p. 7-3
The samples given in this section assumes Microsoft Visual Basic 6.0 for the
development platform and VISA library (VISA COM) for the I/O library.
The format of the VISA resource string that is substituted in the variable
strVisaAddress varies for GPIB, RS232C, USB and LAN interface.
For the GPIB operation, device address of 1 is assumed.
For the RS232C, the communication parameters are required for 19 200 bps, Data 8
bits, Stop 1 bit, Parity NONE, and the COM port 1 is also required. Set the PAT
interface to match these conditions.
For the USB operation, there are no interface parameters that need to be set on the
PAT, but the USB VID (vendor ID), PID (product ID), and serial number must be
specified explicitly in the VISA resource string. The VID and PID values can be
verified also on the CONFIG setting display of the PAT. The serial number can be
verified on the rear panel of the PAT.
For the LAN interface connection, it is required the IP address determined by the
interface setting of the product to specify the VISA resource character string clearly.
The value of IP address can be confirmed by the config setting display (CF57 to
CF60).
See