Kikusui PAT160-25T, Руководство по эксплуатации

Страница: 182 / 218

A-2
PAT-T 4kW
A.1 Lists of Messages
Table A-1 FETCh | MEAS u re s u bsystem
Table A-2 MEMory s u bsystem
Table A-3 OUTP u t s u bsystem
Table A-4 SE N Se s u bsystem
SCPI command: Command name in the short form
*RST: Yes for commands that are affected by *RST
R/W: Q u ery command (R)/set command (W).
†
: 1, 2, and 3 indicate SCPI standard command, command in revie w , and KIKUSUI original
command, respectively.
SCPI Command Setting
Defa u lt Resp. *RST Description R/W †
Program header
Parameter Unit
FETC[:SCAL] | MEAS[:SCAL]
:VOLT
A N R3
Q u eries the meas u red voltage
o u tp u t.
R 1
:CURR
V N R3
Q u eries the meas u red c u rrent
o u tp u t.
R 1
SCPI Command Setting
Defa u lt Resp. *RST Description R/W
†
Program header Parameter Unit
MEM
:KLOCK bool O N N R1
Sets the preset memory recall
w hile locked.
R/W 3
:RCL n u meric 1 to 3 Recalls a preset memory. W 3
:SAV n u meric 1 to 3 Saves to a preset memory. W 3
SCPI Command Setting
Defa u lt Resp.
*RST
Description R/W †
Program header
Parameter Unit
OUTP
[:STAT] bool OFF N R1 Yes O u tp u t on/off. R/W 1
[:STAT]:TRIG bool OFF N R1 Yes
Sets w hether to t u rn the o u tp u t
on/off u sing a trigger.
R/W 3
:EXT char N ORM | I N V N ORM char Yes
Sets the logic of the o u tp u t on/
off u sing external contact.
R/W 3
:PROT:CLE Clears the alarm. W 1
:PO N :STAT char RST | AUTO RST char Yes O u tp u t stat u s at po w er-on. W 3
SCPI Command Setting
Defa u lt Resp. *RST Description R/W †
Program header Parameter Unit
SE N S:AVER:CLE Clears the meas u red date. W 3