B-26
BOP-1K 091719
B.83
[SOURce:]LIST:SAMPle? QUERY
LIST:SAMP?
Syntax:
Short Form: LIST:SAMP?
Long Form: LIST:SAMPle?
Returns:<INT_VALUE>,<INT_VALUE>....<INT_VALUE>[V|C]
Description:
Returns a comma-separated list of numbers representing points, followed by V or C.
The point
listings are determined by the settings of LIST:SAMP:CURR and LIST:SAMP:VOLT commands. The
sample(s) occur after the points indicated. The type of list is indicated by V (Voltage) or C (Current).
(See Figures B-8 and B-9.)
B.84
[SOURce:]LIST:SEGMent COMMAND
LIST:SEGM
Syntax
:
Short Form: LIST:SEGM {INIT | REP]
Long Form: LIST:SEGMent {INITial | REPeating]
Description:
Establishes whether waveform segment is initial (INIT) or repeating (REP) segment.
Repeating
segment is executed for each cycle specified by LIST:COUN. Initial segment is executed only on the
first count and skipped for all subsequent counts. Useful for preconditioning applications. All segments
except the last may be set to Initial or Repeating. The last segment is always Repeating.
B.85
[SOURce:]LIST:SEGMent? QUERY
LIST:SEGM?
Syntax
:
Short Form: LIST:SEGM?
Long Form: LIST:SEGMent?
Return Value: {01 | 00}
Description:
Returns REP when segment is set to repeating or INIT when segment is set to initial
B.86
[SOURce:]LIST:SET:SAMPle COMMAND
LIST:SET:SAMP
Syntax:
Short Form: LIST:SET:SAMP value
Long Form: LIST:SET:SAMPle value
where value = sample pulse duration, between 0.00025 and 0.034 (Seconds)
Description:
Establishes sample pulse duration.
This command must be used when measuring a sample, but
must only be issued once, otherwise a -100 “command error: will result. (See Figures B-8 and B-9.)
B.87
[SOURce:]LIST:SET:SAMPle? QUERY
LIST:SET:SAMP?
Syntax:
Short Form: LIST:SET:SAMP?
Long Form: LIST:SET:SAMPle?
Returns: <exp_value>
Description:
Returns sample pulse duration.
Returns sample pulse duration set by LIST:SET:SAMP command,
between 0.00025 and 0.034 Second.
If
sample pulse duration
has not been set, error 100- “com-
mand error” results.
B.88
[SOURce:]LIST:SAVE COMMAND
LIST:SAVE
Syntax:
Short Form: LIST:SAVE <Name><n>
Long Form: LIST:SAVE <Name><n>
where:
<Name> = 9 characters max representing the name of the waveform to be saved. Must be at least 1
character and contain no spaces. lower case characters are automatically converted to uppercase.
<n> = number from 1 to 16 representing location where waveform is to be saved.
Description:
Saves the waveform segments constructed using LIST:VOLT:APPL or LIST:CURR:APPL com-
mands into location specified by <n> under the name specified in <Name>.
A maximum of 10
segments can be saved. LIST:SAVE saves the segments up to 10. The count specified by LIST:COUN
and the operating protection limits are also saved.
Содержание BOP-ME 1KW
