Katana S610M, Руководство пользователя

Страница: 61 / 162

31
KATANA S610M Inverter Specialized for Elevator Manual
F91.05 Rated voltage 0~999V
(Auto decided and set by the
model)
1V Factory
setting
*
F91.06 Rated current 0~299.9A
(Auto decided and set by the
model)
0.1A Factory
setting
*
Group F92 Status Display Parameters
F92.00 Given speed -10.000~10.000m/s 0.01m/s 0.00 *
F92.01 Instruction speed (after
integrator) -10.000~10.000m/s 0.01m/s 0.00 *
F92.02 Feedback speed -10.000~10.000m/s 0.01m/s 0.00 *
F92.03 The set frequency -100.00~100.00Hz 0.01Hz 0.00 *
F92.04 Instruction frequency
(after integrator)
-100.00~100.00Hz 0.1Hz 0.0 *
F92.05 Output frequency -100.00~100.00Hz 0.01Hz 0.00 *
F92.06 Output voltage 0~480V 1V 0 *
F92.07 Output current 0.0~3Ie 0.1A 0.0 *
F92.08 Torque current
-300.0~+300.0
％
0.1% 0.0 *
F92.09 Flux current
0~+100.0
％
0.1% 0.0 *
F92.10 Power of the motor
0.0~200.0%
（
relative to rated power
of the motor
）
0.1% 0.0 *
F92.11 Estimated frequency of
the motor -100.00~100.00Hz 0.01Hz 0.00 *
F92.12 Actual frequency of the
motor -100.00~100.00Hz 0.01Hz 0.00 *
F92.13 Bus voltage 0~800V 1V 0 *
F92.14 Operating status of the
inverter
0
～
FFFFH
bit0
：
Operating/Shutdown
bit1
：
Reverse/forward
bit2: Operating at zero speed
bit3
：
during acceleration
bit4
：
during deceleration
bit5
：
Operating at constant speed
bit6
：
during pre-excitation
bit7
：
during auto tuning
bit8
：
during overcurrent limiting
bit9: during DC overvoltage
limiting
bit10
：
during torque limiting
bit11
：
During speed limiting
bit12
：
inverter error
bit13
：
speed control
1 0 *