manualshive.com logo in svg

Hyundai HX145 LCR, Руководство пользователя, Страница: 455 / 702

Поделиться
Скачать
Hyundai HX145 LCR Скачать руководство пользователя страница 455

7-30

7. TURNING JOINT

7. TURNING JOINT

Maintenance standards

Remedy

Plating worn or peeled due to seizure or contamination.

·

Worn abnormality or damaged more than 0.1 mm

    (0.0039 in) in depth due to seizure contamination.

·

Damaged more than 0.1 mm (0.0039 in) in depth.

·

Worn more than 0.5 mm (0.02 in) or abnormality.

·

Worn less than 0.5 mm (0.02 in).

· 

Damage due to seizure or contamination remediable 
within wear limit (0.5 mm) (0.02 in).

·

Worn more than 0.5 mm (0.02 in) or abnormality.

·

Worn less than 0.5 mm (0.02 in).

· 

Damage due to seizure or contamination remediable 
within wear limit (0.5 mm) (0.02 in).

·

Extruded excessively from seal groove square ring.

· 

Slipper ring 1.5 mm (0.059 in) narrower than seal 
groove, or narrower than back ring.

·

Worn more than 0.5 mm (0.02 in) ~ 1.5 mm (MAX.)

 

 

 

 

       (0.059 in)

Sliding surface with 
sealing sections.

Sliding surface 
between body and 
stem other than 
sealing section.

Sliding surface 
with thrust plate.

Sliding surface 
with thrust plate.

-

-

-

Replace

Replace

Smooth with oilstone.

Replace

Smooth

Smooth

Replace

Smooth

Replace

Replace

Replace

Replace

Part name

Body,

Stem

Cover

Seal set

Square ring

Extrusion

1.5mm (max.)
(0.059 in)

Содержание HX145 LCR































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов