manualshive.com logo in svg

Hyundai HX145 LCR, Руководство пользователя, Страница: 333 / 702

Поделиться
Скачать
Hyundai HX145 LCR Скачать руководство пользователя страница 333

5-74

User mode switch

User mode switch

290F3CD89

(3)

(3)

This switch is used to memorize the current machine operating 
status in the MCU and activate the memorized user mode. 

·

Memory : Push more than 2 seconds.

·

Action    

 

: Push within 2 seconds.

·

Cancel   : Push this switch once more within 2 seconds. 

Refer to the page 5-78 for another set of user mode.

①

②

This  switch is used to select the travel speed alternatively.

·

           : Low speed

·

           : High speed

Do  not  change  the  setting  of  the  travel  speed  switch. 

Do not change the setting of the travel speed switch. 
Machine stability may be adversely affected. 

Machine stability may be adversely affected. 
Personal injury can result from sudden changes in machine 

Personal injury can result from sudden changes in machine 
stability. 

stability. 

Travel speed switch

Travel speed switch

①

※

290F3CD91

(4)

(4)

This switch is used to activate or cancel the auto idle function. 

·

Pilot lamp ON   : Auto idle function is activated.

·

Pilot lamp OFF :  Auto idle function is cancelled.

The buzzer sounds when the machine has a problem.
In this case, push this switch and buzzer stops, but the warn-
ing lamp blinks until the problem is cleared.

This switch is used to operate the work light. 
The pilot lamp is turned ON when operating the switch. 

Auto idle/ buzzer stop switch

Auto idle/ buzzer stop switch

Work light switch

Work light switch

①

②

①
②

(5)

(5)

(7)

(7)

290F3CD90

290F3CD93

This switch is used to return to the previous menu or parent 
menu.
In the operation screen, pushing this switch will display the 
view of the camera on the machine (if equipped).
Please refer to page 5-90 for the camera.
If the camera is not installed, this switch is used only ESC 
function.

Escape/Camera switch

Escape/Camera switch

①

②

③

290F3CD92

(6)

(6)

Содержание HX145 LCR































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов