Hawker Beechcraft Hawker 800XP, Руководство по эксплуатации для пилотов, Страница: 824 / 923

Page 1-17
Pilot’s Operating Manual
P/N 140-590032-0007
Revision A4: Sep, 2010 Section VI Sub-section 1
GROUND HANDLING
COVERS AND BLANKS (Figure 4)
Covers and blanks should be used to protect the following:
NOTE: The dorsal intake blank is positioned using the folding handle stowed with the blank. Using a
servicing mat and observing the KEEP OFF areas, stand on the left wing to install the blank.
Additional covers and blanks may be used to protect the following:
NOTE: If used, make sure the inside of the windshield cover is clean and free from all contaminates
before installing and do not drag the cover over the screen.
Installation of Engine Covers
(a) Position the intake/exhaust covers over the engine pod intake and exhaust with the interconnecting
strap to the outboard side of the pod.
(b) Attach the snap fasteners of the forward and rear inboard straps to the snap fasteners on the
underside of the pylon.
(c) Adjust the tensioners on all three straps to make sure of the even positioning and security of the
fasteners.
• Stall Warning Vents
• Static Vents
• Pitot Heads
• Dorsal Air Intake
• Cold Air Unit Exhaust
• Engine Intake and Exhaust
• APU (if installed) Intake, Exhaust and Generator
Cooling
• Main Wheels • Ice Detector Head
• Nose Wheels • Windshields
Figure 4
Covers and Blanks