Hawker Beechcraft Hawker 800XP, Руководство по эксплуатации для пилотов

Страница: 279 / 923

Page 13-4
Pilot’s Operating Manual
Original Issue: Feb, 2002
Sub-section 13
LIGHTING SYSTEMS
Hawker 800XP Pro Line 21
Section III - SYSTEMS DESCRIPTION
FLIGHT COMPARTMENT LIGHTING
INSTRUMENT and PANEL LIGHTING (Figure 2)
Circuit control for the electroluminescent display panels, instruments and the pedestal lighting is
provided by a “successive action” LTS MASTER push button switch on the overhead roof panel and the
dimming controls on the overhead roof panel and the left and right glareshields. The LTS MASTER
switch incorporates an ON caption, which illuminates when pushed.
The main instrument panel and glareshield panel lighting is provided by electroluminescent display
panels individually attached to the instrument panels and the glareshield.
The instrument electroluminescent display panels are controlled by the two rotary dimmer switches
located on the left and right glareshield side control panels and labelled INSTRUMENT PANEL -
PANELS. The glareshield side and upper electroluminescent display panels are controlled by the two
rotary dimmer switches located on the left and right glareshield side control panels and labelled
GLARESHIELD PANEL.
Floodlights and emergency lights are mounted on brackets in two places on each lower canopy rail and
in four places under the main instrument panel glareshield. The flood lights are controlled by a rotary
dimmer switch located on the left and right glareshield side control panels and labelled PANEL LTS -
FLOOD. The emergency lights are controlled by a three position switch on the left and right glareshield
side control panels and labelled PANEL LTS - EMERG/OFF/STORM.
The panel-mounted instruments have integral lights controlled by the two rotary dimmer switches
located on the left and right glareshield side control panels and labelled INSTRUMENT PANEL - INST.
The primary flight displays and the multi-function displays have integral lighting and are controlled by
the two rotary dimmer switches located on the left and right glareshield side control panels and labelled
INSTRUMENT PANEL - DISPLAYS.
Where a requirement for panel or instrument lighting is desirable and no integral lighting exists,
panel-mounted pillar lights are utilized. These are controlled by a rotary dimmer switch located on the
left glareshield side control panel and labelled PEDESTAL.
The pilot side console lighting is controlled by a rotary dimmer switch located on the left glareshield side
control panel and labelled CONSOLE - PANEL. The copilot side console lighting is controlled by rotary
dimmer switches located on the right glareshield side control panel and labelled CONSOLE - PANEL
and DIGIT.
The overhead roof panel lighting is provided by two electroluminescent display panels individually
attached to the rear and forward panels. The roof panel instruments have integral lights. The overhead
roof panels and instrument lighting is controlled by two rotary dimmer switches located on the right side
of the overhead roof panel labelled PANEL DIM and INSTR DIM.